120V AC Outlets. Still?

Yes, I'm still working on them.  The real problem for me is that the original box outlets didn't have a monster honking GFCI in them before, and that monster honking GFCI takes up a TON of space.  I couldn't event get the ground wire in place with a heat shrink terminal as it stuck out in a direction that wouldn't fit into the box.  I finished up the outlet in the V-berth, and eventually got the GFCI more or less in place.  I just need to tie in the grounds to the box and it will be done.  Then, I'll just need to finish up the wet locker outlet.  Very, slow, going!

The good news, however, is that I managed to get all my new halyards reeved.  I have to say, they look really nice.  The StaSet-X is definitely stiffer than the Sta-Set, but given how little I handle a halyard vs. a sheet, I don't see where it will be a problem.  I think all the talk about StaSet-X being unfriendly to handle might be awfully nit-picky.

I'm continuing to work on reassembling the shelves for the starboard outboard cabinet.  I had reassembled it, but inadvertently left the long shelf out, and the wine holder had broken way back and not been repaired.  I now have the shelf back in place, and have made a template for the wine holder.  Once I'm sure of the fit I'll cut a new one from some of my leftover teak plywood.  That stuff is so expensive I'll be measuring 10 times and cutting once.

The salon table's varnish work is coming out stunning.  It is doing exactly what I wanted and filling the pores to seal the wood.  I think the prior owners of the boat used teak cleaner one too many times, leaving the pores really eroded.   Although the going is extremely slow, after around 6 coats the surface gets to be a very smooth sheet of glass that won't let water do any further damage.  I don't plan to use varnish everywhere, but the table needed some kind of preservation or it wasn't going to look good much longer.  One sweaty glass of ice water set in the wrong spot would have been permanent damage.

I'm very anxious to get the table project finished because it has taken over my workshop, and the fumes from each coat really stink up the house.  My wife is being very patient with me, but I know it's driving her nuts.  And finally, there's just enough parts when you take the whole thing apart...  To make me wonder if I'll be able to get it back together the right way!