Got Butyl?

Whether you have a shiny new boat, or a lovingly restored Good Old Boat, you need to know how to properly bed hardware on deck or you will eventually create a nightmare that is hard to wake up from. Take this from a man who scooped balsa-turned-chocolate-pudding out of his rotten decks.

There's a myriad of goops you can use to seal things, and almost all of them tend to be a bad choice.  One of the more popular marine sealants is incredibly expensive, and incredibly hard to clean excess ooze from.  It also cures much faster than you typically want it to.

Then there's butyl tape.  It's not marine-specific, and is in fact used by the RV industry also.  It lasts 30+ years, leaves no residue, has better elasticity than most marine products, and allows you to easily pull and reposition something that you set incorrectly.  If you spend time researching best practices for sealing deck hardware, you will also find that most of the people who really know what they are doing swear by it.  Hands down.

The thing that I am baffled by is how hard it is to buy the stuff.  There's a wide spectrum of quality, so you can't just buy whatever you find and expect success.  This is something all marine chandleries and your local West Marine should be stocking, pushing, and selling like mad.  But that's just not the case. 

Until the day of rejoice in which the enlightened mariners of the world embrace an expectation of getting butyl in their own city's stores, please support someone who has done a lot to support the rest of us guys trying to learn how to do it right so we can afford to sail. 

Compass Marine Butyl Tape

I used this tape to rebed just about everything on my boat.  It's very high quality stuff.  Buy more than you need so you have it on hand long before it's needed.  A big part of doing the job right is having what's needed to get it done on-hand when the time comes so you're not tempted to cheese-ball the project.

Launching is Bittersweet

Ravat is happily in the water now, which marks the first time in three seasons of ownership that I've been able to meet my launch goal.  This is a big milestone for me, which is almost as exciting as the start of the sailing season itself. 

Stepping onto my boat in the water is magical; The slight rocking as my weight shifts makes me feel she is alive beneath me.  This is in stark contrast to the stiff and lifeless motion of the boat while cradled in the off season.  And so it was that I enjoyed my first steps onto the boat yesterday.

And then I noticed that the yard crew was wearing combat boots and had recently walked through mud.  I had spent three hours cleaning the non-skid before this launch.  Then I entered the cabin to find that the main bettery switch had been left to "combine" rather than "on".  Not sure why as the starter battery is brand new and fully charged.  Oh yes, and the engine cooling seacock was left wide open.

I'm not sure how this sort of thing goes in other marinas, but here at my own, no one gives your boat the love that you do.  All's well that ends well though, and with a bit of scrubbing she'll be her old self.  In the end, my silly grin overpowered the cringes.

Let the rigging begin!

Ships Log... First Entry

What am I doing?  I've asked myself that question many times over the past few years as I grew my sea legs.  Perhaps I should call them fiberglass legs since I spent the majority of that time working on the boat rather than sailing it.

The details of all that refit work are captured on my boat's web site.  But as I started to complete the bigger projects I realized I have two distinct tracks to the information I'd like to share.

The intent of this blog is to provide a venue for my thoughts about sailing.  Not about the specific details of restoring CS27 sailboats, but the experiences of a sailor.  One who reads sailing and maintenance books, internet posts, magazines, and everything I can get my hands on.  One who rebuilt his boat, and gets into a lot of different projects.  One who loves to walk the docks and observe cool ideas to integrate.  And yes, I even get out to sail my boat which generates even more ideas! All that reading, observing, and thinking gives me a lot of things to write about.  So you see, this blog is an essential outlet for me.

All the articles on this site will probably show a bit of a CS27 bias, and certainly the bias of a DIY oriented sailor, but the focus will be on the experience more than the engineering.  If you're still with, please clip your tether to the jack lines as we are about to clear the dock and set sail.

Installing a Carbon Monoxide Detector

One of the (long list of) items on my boat's last survey suggested that I should install a Carbon Monoxide detector in the main cabin.  I did some research on this topic, and I can't help but agree that there is some degree of risk, and it seems to be something that strikes in very unexpected situations.

My young son loves to play in the cabin while we're out, and this often includes the 20 minute motor in or out of the main channel which is difficult to sail through due to wind direction and other traffic.  If he were to be affected by CO poisoning I wouldn't even notice from the cockpit.  So yes, I'm in favor of adding a simple measure of safety.

The next step on my journey was to select a model to install.  Many people suggested installing a residential unit.  This has the benefit of opening up to products which are battery powered, and thus won't require running wires and ripping out panels.  On the other hand, these models aren't usually rated for marine duty.  Does that matter?

I think so.  For one thing, most homes don't exist in the constant state of humidity which boats do.  A cheaper unit could have connections which are more susceptible to corrosion.  More significantly though is that a non-marine unit may not be rated for the constant motion and vibration associated with being on water.  Is there a tangible and observed difference in build quality I can point to?  No, not at this time.

I selected the Xintex Fireboy CO Sentinal.  It's marine rated, and one of the smaller units I could find.  My boat is only 27 feet long, so I don't have a vast cavernous interior which has numerous places to put this hunk of plastic.  It's not a very attractive unit, and I really prefer the look of teak and brass to this.  Having said that, I think this is as unobtrusive as it gets, so I'm happy with the decision.

Now that I have a detector, I need to find a location.  And here's where it gets interesting.  The instructions suggest eye level mounting.  Is that eye-level when standing?  Or when seated?  Or when I'm lying on the settee?  After a bit more research it looks like the recommendation is to ensure you can see the little indicator lights, so it's more about visibility than mounting level.  The next suggestion was to avoid proximity to hatches or something like a galley stove.  That makes sense.  But what are other people doing?

I asked my owners association mail list what other people had done, and got back very little that was helpful.  I don't think many people have them installed.  Next I tried consulting the omniscient Google, and again, found almost nothing which described an installation process, location, or photographs of this project.  So I'm left wondering how other people have tackled this job, and why this project has almost no record of others doing it.  You can find a million detailed project descriptions out there for anything... Else...

I'm still debating the location in my own cabin.  I have a few choices, and I'm trying hard to figure out which one will let me see the LEDs, but not draw much attention to the rest of the unit.  I'm beginning to think that like me, most DIY boaters have a CO detector sitting in their lockers waiting for someone else to come up with a great idea to inspire them to complete an installation.  I'll try to come up with something over the next few weeks and post a photo which starts the movement.